
Bright steel production:
The following products are manufactured in the bright steel production facilities:
- Blank bars made of bar steel (stripped)
- Blank bars made of wire steel (stripped or drawn)
- Bare wire (stripped or drawn)
Two different methods are used to produce bright steel. Bright steel may either be drawn, which is the non-cutting cold-forming of hot-rolled, scaled raw material. Bright steel may also be peeled. Additional smoothing and polishing improves the surface even further and increases dimensional accuracy.
Machining and service
Thanks to up-to-date machining equipment we are in a position to supply customer orientated and individual machining. The range of rotation-symmetric parts covers the machining of plain bars, forged pieces and blanks up to finish machining of hardened and tempered cold rolls.
Additionally, we machine plates and blocks on demand in various machining states. Further to machining of 6 sides, we provide further machining according to drawing and/or data up to finish machined pieces. Our customer specifies the required machined condition.
The machining shop in Witten manufactures products for the Tool- and Mouldmaking business. We apply latest technology of machine and computer systems. Various new machines were integrated into the production range. The production thus covers the entire range from rough machined blocks, to precision flats and squares up to deep – drilled, ready to use pieces of a maximum weight of 50 tons.
- Pre-milled blocks
- Fine milled plates and bars
- Precision flats
- Moulds and frames close to final dimension e.g. for the production of plastic parts
The machining shop in Krefeld concentrates on the production of rotation symmetrical pieces of a weight up to 22 tons. We apply conventional and modern CNC lathes and grinding machines. In order to reinforce the machining force, among others a combined turning and milling machine as well as several deep-drilling machines were put into service. Focus on the production is laid upon rolls, shafts, mandrels, cylinders and guide rolls for continuous casters.
- Blanks for cold rolls
- Finish machined cold rolls
- Forgings (e.g. for Oil-Tools)
- Hydraulic components (piston rods)
- Fittings and spares for rolling and steel mills (guide rolls for continuous caster)
- Pre-machined hollow bars
- Perforated discs for drive technology
Production Scope Machining Shop Krefeld | |
---|---|
Rough Turning | Diameter max. 1.200 mm |
Length max. 10.000 mm | |
Weight per piece max. 22 tons | |
Finish Machining | Diameter max. 1.130 mm |
Length max. 6.500 mm | |
Weight per piece max. 10 tons | |
Grinding | Diameter max. 850 mm |
Length max. 5.500 mm | |
Weight per piece max. 10 tons | |
Drilling | Diameter max. 1.000 mm (outside diameter) |
Length max. 12.000 mm | |
Weight per piece max. 17 tons |
Production Scope Machining Shop Witten | |
---|---|
Pre-/and Finemilling | Dimension max. 2.000 x 1.250 x 6.000 mm |
Weight per piece max. 40 tons | |
Surface Quality up to Rz 20 μm | |
Grinding | Dimension max. 1.150 x 680 x 4.000 mm |
Weight per piece max. 4 tons | |
Surface quality up to Rz 10 μm | |
Other | Rough milling of plates and blocks (acc. to CAD) |
Drilling of heating- and cooling systems | |
Finish machining |